Yamaha PSR-2100 Manual Do Utilizador

A standard pair of stereo headphones can be plugged in 
here for private practice or late-night playing. The internal 
stereo speaker system is automatically shut off when a 
pair of headphones is plugged into the PHONES jack 
(page 152).

By connecting a microphone to the PSR-2100, you can
enjoy singing along with your own performance or song
playback. (A dynamic microphone is recommended.) The
PSR-2100 outputs your vocals or guitar sounds through
the built-in speakers.

Connect your microphone to the MIC./LINE IN jack 
(standard 1/4" phone jack).

Set the [MIC. LINE] switch (located next to the MIC./
LINE IN jack) to the MIC. position.

Use the [INPUT VOLUME] 
knob (located next to the 
MIC./LINE IN jack) to set the 
microphone volume then 
trying singing into the 
microphone. 
The volume should be set high enough that the 
SIGNAL lamp on the top panel lights steadily when 
you sing, but not so high that the OVER lamp lights 
(page 131).

Before connecting the PSR-2100/1100 to other electronic compo-
nents, turn off the power to all the components. Before turning the 
power on or off to all components, set all volume levels to minimum 
(0). Otherwise, electrical shock or damage to the components may 
occur.

Use an unidirectional microphone for best results.

When connecting a microphone

When connecting a guitar

You should set the [MIC. LINE] switch to the LINE position when 
connecting an audio source with line-level output to the MIC./LINE 
IN jack.