Yamaha CVP-208 Manual Do Utilizador

To use headphones, connect them to one of the PHONES
jacks (standard 1/4" phone jacks) located on the under-
side of the keyboard. You can also determine whether or
not the internal stereo speaker system is shut off when a
pair of headphones is plugged into the PHONES jack
(page 152). Two people can enjoy listening to the Clavi-
nova together by connecting two pairs of headphones to
the two jacks.

By connecting a microphone to the Clavinova, you can
enjoy singing along with your own performance or song
playback. (A dynamic microphone is recommended.) The
Clavinova outputs your vocals or guitar sounds through
the built-in speakers.

Connect your microphone to the MIC./LINE IN jack 
(standard 1/4" phone jack).

Set the [MIC. LINE] switch (located next to the MIC./
LINE IN jack) to the MIC. position.

Use the [INPUT VOLUME] 
knob (located next to the 
MIC./LINE IN jack) to set the 
microphone volume.
The volume should be set high 
enough that the SIGNAL lamp 
on the front panel lights steadily when you sing, but 
not so high that the OVER lamp lights (page 131).

Before connecting the Clavinova to other electronic components, 
turn off the power to all the components. Before turning the power 
on or off to all components, set all volume levels to minimum (0). 
Otherwise, electrical shock or damage to the components may 
occur.

Use an unidirectional microphone for best results.

When connecting a microphone

When connecting a guitar

You should set the [MIC. LINE] switch to the LINE position when 
connecting an audio source with line-level output to the MIC./LINE 
IN jack.