Yamaha 301 Manual Do Utilizador

Using 

Your Instrument with Other Devices

CVP-305/303/301 Owner’s Manual

194

The explanations here apply to the SYSTEM display to 
be called up in step 4 of the “Basic Operation” on 
page 192.

■ LOCAL CONTROL
Determines whether the Clavinova is controlled by its 
own internal clock or a MIDI clock signal received from 
an external device. INTERNAL is the normal Clock set-
ting when the Clavinova is being used alone or as a 
master keyboard to control external devices. If you are 
using the Clavinova with an external sequencer, MIDI 
computer, or other MIDI device, and you want to syn-
chronize it to that device, set this parameter to the 
appropriate setting: MIDI, USB 1, or USB 2. In this case, 
make sure that the external device is connected prop-
erly (e.g., to the Clavinova’s MIDI IN terminal), and that 
it is properly transmitting a MIDI clock signal. When 
this is set for control by an external device (MIDI, USB 
1 or USB 2), the Tempo is indicated as “Ext.” in the 
Main display

■ Clock setting, etc.
● CLOCK
Determines whether the Clavinova is controlled by its 
own internal clock or a MIDI clock signal received from 
an external device. INTERNAL is the normal Clock set-
ting when the Clavinova is being used alone or used to 
control external devices as the master keyboard. If you 
are using the Clavinova with an external sequencer, 
MIDI computer, or other MIDI device, and you want to 
synchronize it to that device, set this parameter to the 
appropriate setting: MIDI, USB 1, or USB 2. In this case, 
make sure that the external device is connected prop-
erly (e.g., to the Clavinova’ MIDI IN terminal), and that 
it is properly transmitting a MIDI clock signal. When 
this is set to an external device (MIDI, USB 1 or USB 2), 
the Tempo is indicated as “Ext.” in the Main display. 

● TRANSMIT CLOCK
Turns MIDI clock (F8) transmission on or off. When set 
to OFF, no MIDI clock or Start/Stop data is transmitted 
even if a Song or Style is played back.

● RECEIVE TRANSPOSE
Determines whether or not the instrument's transpose 
setting (page 55) is applied to the note events received 
by the instrument via MIDI.

● START/STOP
Determines whether incoming FA (start) and FC (stop) 
messages affect Song or Style playback.

■ MESSAGE SW
● SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI Sys-
tem Exclusive messages on or off. The “Rx” setting turns 
MIDI reception and recognition of MIDI System Exclu-
sive messages generated by external equipment on or 
off.

● CHORD SYS/EX.
The “Tx” setting turns MIDI transmission of MIDI chord 
exclusive data (chord detect. root and type) on or off. 
The “Rx” setting turns MIDI reception and recognition 
of MIDI chord exclusive data generated by external 
equipment on or off.

The explanations here apply to the TRANSMIT display 
to be called up in step 4 of the “Basic Operation” on 
page 192. This determines which parts will be sent as 
MIDI data and over which MIDI channel the data will 
be sent.

Operation
Select the part to be transmitted and the channel via 
which the selected part will be transmitted. You can also 
determine the types of data to be sent.

● With the exception of the two parts below, the 

• UPPER
The keyboard part played on the right side of the key-
board from the Split Point for the Voices (RIGHT1 and/
or 2).

• LOWER
The keyboard part played on the left side of the keyboard 
from the Split Point for the Voices. This is not affected by 
the on/off status of the [ACMP ON/OFF] button.

SYSTEM display

TRANSMIT display