Yamaha M2500 Manual Do Utilizador

The Scene Memory function

1. Use the 

▲

/

▼

 switches or the 0–9/ENTER 

switches of the control section to make the 
MEMORY display show the scene memory 
number that you wish to recall.

The selected scene memory number will blink.

2. Press the RECALL switch.

The scene of the selected scene memory number will 
be recalled.

With the factory settings, you can use the DIRECT 
RECALL of the control section to directly recall scene 
memory numbers 1–8. (This is called the Direct 
Recall function.) When you use direct recall, scene 
memory numbers 1–8 will be recalled the instant you 
press a DIRECT RECALL switch 1–8, without your 
having to press the RECALL switch.

1. With the M2500 in Normal mode, use the ON/

EDIT switches of the monaural/stereo input 
channels, the G1/A7–G8/A14 section, the STE-
REO section, and the MONO/C section to make 
the desired on/off settings.

• Scene memory numbers 129 and 130 can be 

selected only by the 0–9/ENTER switches.

• If the mute groups (page 37) are being used, 

scene memory numbers 1–8 can be selected 
only by the 0–9/ENTER switches.

Note: If a scene has not been saved in the selected 
scene memory number, the MEMORY display will 
indicate “

” (No data), and the scene will not 

be recalled.

Hint: If you press the ▲/▼ switches after using 
direct recall, the scene memory number that had 
been selected prior to the direct recall operation 
will be selected.

Note: If you are using the mute groups (page 37), 
the DIRECT RECALL switches will function as 
mute group switches, and direct recall will not be 
available.

Note: Operating the ON/EDIT switches in Normal 
mode will affect the signals that are output from 
the M2500. If you wish to make on/off settings for 
a scene without affecting the current signal output, 
such as during a rehearsal or an actual perfor-
mance, use Check mode (page 32).