Yamaha 1100 Manual Do Utilizador

The explanations here apply to step #3 of the procedure on page 136.

Quick Start
On some commercially avail-
able song data, certain set-
tings related to the song 
(such as voice selection, vol-
ume, etc.) are recorded to 
the first measure, before the 
actual note data. When 
Quick Start is set to “ON,” 
the PSR-2100/1100 reads 
all initial non-note data of the 
song at the highest possible 
speed, then automatically 
slows down to the appropri-
ate tempo at the first note. 
This allows you to start play-
back as quickly as possible, 
with a minimum pause for 
reading of data.

n

Channel 
Refers to the MIDI channel 
(page 160). The channels 
are assigned as follows:
  Song
     1 - 16
  Accompaniment Style
     9 - 16

n

Phrase Mark
This data specifies a certain 
location in the song data.

Turns Quick Start on/off (see note).

Allows you to play back all songs 
from the same folder continuously.

Determines the MIDI channel assigned 
to the [TRACK2] button.

Determines the MIDI channel assigned 
to the [TRACK1] button.

When set to “ON,” this 
automatically sets the proper 
Track 1 and Track 2 channels. 
Normally, this should be set to 
“ON.”

Determines the language of the 
displayed lyrics. 
When this is set to “AUTO,” the 
language defaults to that of the 
song data. When not set to 
“AUTO,” the language defaults to 
Japanese, when the internal 
setting (page 154) is 
JAPANESE; for all other 
languages, this is set to 
“INTERNATIONAL.”

Determines whether the Phrase 
Mark Repeat function for the song 
is on or off. When this is on, you 
can repeatedly play back a 
specified phrase (selection of 
measures) of the song. The 
method for specifying a phrase 
mark is the same as that in the 
SONG POSITION display 
(page 81).

Determines the harmony channel for 
Vocoder (PSR-2100 only) (page 134).