Yamaha 02R Manual Do Utilizador

MIXING Display Functions

Switching to GANG mode allows you to reposition the stereo signal within 
the stereo field. For example, you could set L5 and R10 before you GANG 
the channels. After you press [ENTER], adjusting either channel moves the 
other a corresponding amount. If you set the left channel to L7, the right 
channel would adjust to R8.

You can also adjust the pan position or balance of the selected channel with 
the controls in the SELECTED CHANNEL group.

These controls allow you to select the pan position of the selected channel. 
The buttons select one of two channels (channels are always paired for the 
pan function). The LED is illuminated in the selected channel of the pair.

Use the rotary encoder to adjust the pan position. The current position is 
indicated on the adjacent LED bargraph.

You can link the odd and even channel pairs by pressing and holding the 
[L/ODD] button and then pressing the [R/EVEN] button. When a pair of 
channels are linked together in GANG mode, The LEDs in both buttons are 
illuminated and the LED of selected channel flashes. The indicator for the 
selected channel also flashes in the adjacent LED bargraph.