Yamaha 02R Manual Do Utilizador

Scene Memories

Virtually all Digital Recording Console 02R mix settings are stored in a 
scene memory. Settings that are not stored consist mainly of analog controls 
and switches. They are: +48V phantom switches, A/B input switches, 20dB 
(pad) switches, GAIN controls, T/B LEVEL control, STUDIO LEVEL 
control, PHONES LEVEL control, C-R LEVEL control, and the display 
CONTRAST control.

MIDI setup and assignment table data are also not stored in the scene 
memory.

The Edit Buffer is the current mix settings. When a scene memory is 
recalled, the mix settings of the selected scene memory are written to the 
Edit Buffer. When a scene memory is stored, the mix settings in the Edit 
Buffer are written to the selected scene memory.

The first time you adjust a parameter in the current mix settings, the Edit 
Indicator of the SCENE MEMORY indicator on the display panel will start 
to flash. This indicates that the current mix settings – those in the Edit 
Buffer – do not match those of the scene memory previously recalled.

The Digital Recording Console 02R has two special scene memory 
locations. Scene number ”0“ (zero) and scene number “U” are read-only 
memory locations.

Scene number “0 – Initial Data” contains the initial mix settings for the 02R. 
When you want to reset all the mixer settings to their initial values, recall 
this scene memory.

Scene number “U” is the UNDO memory. It always contains a copy of the 
last scene memory. Even if you have pressed the [STORE] button and 
confirmed the operation, you can still recall the contents of the overwritten 
scene memory by recalling scene number “U”.

Edit Indicator