Yamaha 02R Manual Do Utilizador

Automation

The 02R displays the received timecode in this large area on the screen. If 
you select INT (internal) timecode, the timecode display immediately 
starts to count the time. You can reset this value with the “INT Start Time” 
field.

You can set the communication speed to a computer plugged into the 
TO HOST connector on the back of the 02R. The default speed is 
38.4 kbps (kbaud), indicated by clock

×

1. This connector is used by a 

computer running the Project Manager software.

Select the timecode type from the following list:

•

SMPTE timecode

•

MTC (MIDI timecode)

•

Internal (INT) timecode

Select the timecode frame rate from the following list:

•

24 frames per second.

•

25 frames per second.

•

29.97 frames per second (30 drop frame).

•

30 frames per second.

When the 02R receives timecode during enable status (box checked), it 
will start playback of the AUTOMIX (or recording if it is in REC ready 
mode). If the 02R is in disable status, the AUTOMIX will not function.

The automation system can record the following parameters: FADER, 
CH ON, PAN, or EQ. The FADER parameter includes the AUX send 
level. You can select whether or not to overwrite one of these four 
parameters.

Use the [SEL] button to select which channel the parameter is to be 
recorded from. The parameter will be overwritten during the record 
operation. During the overwrite operation, the [SEL] button will flash.

During automation recording, you cannot change a parameter settings 
unless the corresponding parameter has been selected and the channel 

...continued