Yamaha 02R Manual Do Utilizador
144
MIDI
Digital Recording Console 02R User’s Guide
Program Change Assign
The 02R uses MIDI Program Change messages to recall scene memories.
Display Screen
Shown below is the second MIDI display function – the MIDI Program
Change Assign screen:
Change Assign screen:
The default Program Change Assign table consists of a mapping of
Program Change numbers 1 through 64 to Scene Memories 1 through 64.
Program Change numbers 65 through 127 are mapped to nothing.
Messages containing those Program Change numbers are ignored.
Program Change number 128 is mapped to Scene Memory 0 (initial data).
Program Change numbers 1 through 64 to Scene Memories 1 through 64.
Program Change numbers 65 through 127 are mapped to nothing.
Messages containing those Program Change numbers are ignored.
Program Change number 128 is mapped to Scene Memory 0 (initial data).
TABLE RESET
The TABLE RESET command sets the Program Change Assign table back
to its default mapping.
to its default mapping.
UNDO
The UNDO command restores the Program Change Assign table to its
previous state.
previous state.
Backup
You can create a Program Change Assign table and save it to a data storage
device such as a MIDI data filer by executing the Program Change Assign
table Bulk Dump command.
device such as a MIDI data filer by executing the Program Change Assign
table Bulk Dump command.
1.
Press the [MIDI] button.
A MIDI display function
appears.
appears.
Press the [MIDI] button
repeatedly until the
“MIDI Program Change
Assign” screen appears.
repeatedly until the
“MIDI Program Change
Assign” screen appears.
2.
Select a Program
Change number with
the CURSOR buttons. Use
the encoder wheel to
change the value of the
corresponding Scene
Memory number.
Change number with
the CURSOR buttons. Use
the encoder wheel to
change the value of the
corresponding Scene
Memory number.
Press the [ENTER] button
to enable or disable the
current Scene Memory
number. When a
memory is disabled,
“---” appears beside the
Program Change
number.
to enable or disable the
current Scene Memory
number. When a
memory is disabled,
“---” appears beside the
Program Change
number.
3.
Use the CURSOR buttons
to select the “TABLE
RESET” control icon and
press the [ENTER] button.
to select the “TABLE
RESET” control icon and
press the [ENTER] button.
4.
Select the “UNDO”
control icon using the
CURSOR buttons and
press the [ENTER] button.
control icon using the
CURSOR buttons and
press the [ENTER] button.
MIDI