Yamaha 02R Manual Do Utilizador

Página de 354
Installing Options
183
Digital Recording Console 02R User’s Guide
Digital Cascade Kit (CD8-CS)
The digital cascade kit (CD8-CS) is used to connect two or more Digital 
Recording Console 02R units together. The kit consists of two cascade I/O 
cards and a special cable. When two or more 02R units are connected 
together, they share the output buses 1 through 8, four auxiliary buses (two 
paired buses, AUX A and AUX B), the stereo bus, and the solo bus.
Installing the CD8-CS
The cascade I/O card (CD8-CS) is a single slot card. At least one cascade 
I/O card should be installed in each 02R. If you are connecting more than 
two units, the middle units should have two cards. The cascade I/O cards 
should be installed in SLOT3 or SLOT4. You should reserve SLOT1 and 
SLOT2 for digital I/O cards.
1.
Set the IN/OUT switch of the cascade I/O card installed in the first 
02R to the IN position.
This unit will be the cascade master.
2.
Set the IN/OUT switch of the cascade I/O card installed in the 
second 02R to the OUT position.
This unit will be the cascade slave.
02R cascade slave (Word clock slave)
75
Ω
switch
ON
02R cascade slave (Word clock slave)
75
Ω
switch
ON
SLOT 1
SLOT 2
Digital MTR 
(Word clock master)
Digital MTR 
(Word clock slave)
Digital MTR 
(Word clock slave)
Digital MTR 
(Word click 
slave)
SLOT 2
SLOT 1
SYNC
SYNC
SYNC
SLOT 4 SLOT 4
WORD CLOCK OUT
WORD
CLOCK
IN
WORD
CLOCK
IN
WORD
CLOCK
OUT
OUT
IN
CD8-CS