Yamaha 02R Manual Do Utilizador
Introductory Recording Tutorial
39
Digital Recording Console 02R Getting Started Guide
2.
Press the [SEL] button for MIC/LINE 1 and rotate the pan rotary
encoder.
encoder.
The LED inset in the [L/ODD] button will be illuminated. The current pan
position is indicated on the adjacent LED bargraph. As an alternative, you
can use the CURSOR buttons to select the PAN icon for MIC/LINE 1 and
rotate the encoder wheel until the desired value is shown.
position is indicated on the adjacent LED bargraph. As an alternative, you
can use the CURSOR buttons to select the PAN icon for MIC/LINE 1 and
rotate the encoder wheel until the desired value is shown.
You can adjust the pan position from extreme right/even (R16) through the
centre (C) to extreme left/odd (L16). There are 33 pan positions to choose
from.
centre (C) to extreme left/odd (L16). There are 33 pan positions to choose
from.
Pairing Channels
You can pair the pan controls of two adjacent channels. Linking channels
together is called GANG mode, and provides simultaneous pan
adjustment
together is called GANG mode, and provides simultaneous pan
adjustment
1.
Press the [SEL] button for MIC/LINE 1.
You can also select the MIC/LINE 1 icon using the CURSOR buttons.
2.
Press the [ENTER] button to connect the channels together.
You can also connect the channels together by simultaneously pressing the
[L/ODD] and [R/EVEN] buttons of the PAN block of the SELECTED
CHANNEL group.
[L/ODD] and [R/EVEN] buttons of the PAN block of the SELECTED
CHANNEL group.
The GANG is indicated by a pair of dotted lines linking the top and bottom
of the pan control icons as shown in the following illustration:
of the pan control icons as shown in the following illustration:
When you adjust one channel, the linked channel will also move by a
corresponding amount. For further details, see “Stereo-Pair Pans” on page
37 of the User’s Guide.
corresponding amount. For further details, see “Stereo-Pair Pans” on page
37 of the User’s Guide.