Yamaha 01X Manual Do Utilizador

Overview of the 01X

01X Owner’s Manual

Before Using

Basics Section

Appendix

Getting Started

Reference

Output channel

● Stereo output channel
This is a stereo output channel that processes the signals

sent from each channel to the stereo bus. Stereo faders con-

torl the level of these outputs. It provides a 4-band EQ and

dynamics processor identical to those provided on the

input channels. The output signal of the stereo output chan-

nel is sent via the output patch section to the various output

jacks, and is also simultaneously output to the MONITOR

OUT jacks and PHONES jack.

● Rec bus output channel
This is a stereo output channel that processes the signals

sent from each channel to the rec bus. It provides a four-

band EQ and dynamics processor identical to those pro-

vided on the input channels. The output signal of the rec

bus channel is sent via the master level/output patch sec-

tion to the various output jacks.

The master level of the rec bus can be controlled by using

the channel 1 fader when [MASTER] layer in the MIXER/

LAYER is seleced in Internal mode.

● AUX buses 1 through 4
The signals sent from each channel to AUX buses 1–6 pass

through a master level, and are sent to the output patch sec-

tion.

The master level of AUX buses 1 through 4 can be con-

trolled by using the channel faders 3 through 6 when

[MASTER] layer in the MIXER/LAYER is seleced in

Internal mode.

Getting Started (page 62)

Output patch

Reference (page 90)

Output Patch is the section where output signals are

assigned to mLAN channels 1/2 through 23/24, DIGITAL

STEREO OUT jack, and STEREO/AUX OUT jack. The

following output signals can be selected.

• Stereo bus (The output signal of the stereo bus routed

through the stereo output channel.)

• Rec bus

• AUX bus 1/2

• AUX bus 3/4

• In general, these output signals can be assigned to any output jack or

output channel. For the STEREO OUT jacks and DIGITAL STEREO

OUT jacks, two adjacent odd-numbered/even-numbered signals will

always be assigned.

• The direct out setting for a specific channel is cancelled if the corre-

sponding output channel is assigned to stereo bus, rec bus or AUX

buses (page 90).

STEREO L

ATT

INSERT

STEREO (STEREO BUS) L

STEREO (STEREO BUS) R

AUX 1

AUX 2

AUX 3 (FX1)

AUX 4 (FX2)

4BAND EQ

DY-

NAMICS

DY-

NAMICS

(Gain Reduction)

LEVEL

BAL

METER

STEREO R

METER

*3 Studio Manager only

RECBUS (BUS) L

RECBUS (BUS) R

STEREO (STEREO BUS) L

STEREO (STEREO BUS) R

AUX 1

AUX 2

AUX 3 (FX1)

AUX 4 (FX2)

RECBUS L

DY-

NAMICS

DY-

NAMICS

(Gain Reduction)

METER

LEVEL

METER

INSERT

RECBUS R

*3 Studio Manager only

METER

AUX1(...4)

AUX 1

AUX 2

AUX 3 (FX1)

AUX 4 (FX2)

LEVEL

METER

-10dBV

STEREO/AUX OUT

DIGITAL STEREO OUT

COAXIAL

mLAN OUT

RECBUS

DIRECT OUT1-24

IEEE 1394

DITHER

STEREO

RECBUS

AUX1/2

AUX3/4

STEREO

RECBUS

AUX1/2

AUX3/4

SELECT

(OUT PATCH)

AUX1/2

AUX3/4

STEREO

SELECT

(OUT PATCH)

SELECT

(OUT PATCH)

*1 Wordclock 96kHz/88.2kHz : 16