Yamaha 01X Manual Do Utilizador

01X   Owner’s Manual

These buttons let you control Cubase in the same way as 

using a tape recorder.

No matter what window is active, you can use these to con-

trol song playback/recording and navigate through the 

song.  Also keep in mind that all of your computer shortcut 

keys are active if you want to use them— even while using 

the 01X as a remote control.

Hold down [MARKER] and use the [r] (rewind)/[f] 

(fast-forward) buttons.  If you’ve set up markers in the 

song, these can be used to jump among the marker points.

If you haven’t set up a marker or want to program a new 

one, you can do this from the 01X, too.  Move to the 

desired song position, then press the [WRITE] button.  A 

new marker is set for the current postion.

In Cubase SX, you can loop playback between the left and 

right locators.  To turn this on/off, press the [LOOP] but-

ton.

There are two ways (below) to select a track remotely.  

Notice that selecting a track also automatically arms 

(enables) it for recording.

Press these to select the previous or next track in the 

Project window.  (Note that the track is highlighted in 

Cubase SX, and the corresponding channel [SEL] button 

on the 01X lights.)  These buttons serve the same func-

tion as the up/down keys on your computer keyboard.

Use the BANK [</>] (Left/Right) buttons if necessary 

to select the desired ‘bank’ of eight tracks, then press the 

appropriate [SEL] button.

Rewind

Fast-forward

Stop

Play

Record

Dial
This is like a jog/shuttle wheel on 
a video deck, and gives you an 
even faster way to move the song 
position in the window.

● Previous marker

● Next marker