Korg AX3000G Manual Do Utilizador

32

NOTE: If P2 or P3 is selected, the speed is adjusted by the SPEED 1 (value knob 
2).

This models the popular tremolo circuit that’s built into the BLACK 2x12 model. The 
SPREAD setting lets you produce a panning effect that spreads to left and right.

This models a stereo rotary speaker. When you adjust the speed, it will take a cer-
tain amount of time for the specified speed to be reached – just like on an actual 
rotary speaker. This is because it takes several seconds for the motor that creates 
the rotation to accelerate or decelerate.

P2: PHASER 1/2 are connected in parallel, 

and their LFOs are synchronized (Stereo 
mode).

P3: PHASER 1/2 are connected in parallel, 

and their LFOs are synchronized in oppo-
site phase (Stereo mode).

[1] “DEPTH”

0.0–10.0

* Adjusts the tremolo depth.

[2] “SPEED”

1.0–10.0[Hz]

* Adjusts the tremolo speed.

[4] “SPREAD”

0.0–10.0

Adjusts the left/right spaciousness.

[5]  “LEVEL”

1.0–10.0

* Compensates the output level.

[1] “DEPTH”

0.0–10.0

* Adjusts the modulation depth.

[2] “SPEED 1”

0.1–10.0[Hz]

* Adjusts the rotational speed of the speaker. If 

you assign “ROT SPD” to the CONTROL 
switch, this will be the SLOW speed. This 
knob is effective even if you’re not using the 
CONTROL switch. (p.43 Control switch set-
tings)

[4] “SPEED 2”

0.1–10.0[Hz]

* Adjusts the rotational speed of the speaker. If 

you assign “ROT SPD” to the CONTROL 
switch, this will be the FAST speed. This 
knob will not function if you’re not using the 
CONTROL switch. (p.43 Control switch set-
tings)

[5] “ACCEL”

1.0–10.0

* Adjusts the time it takes for the rotational 

speed to change. With higher settings, the 
change will take more time.

CONTROL 

switch ROT SPD

If you select “ROT SPD” as the CONTROL 
switch setting, the rotation speed will alter-
nate between SLOW/FAST (SPEED 1/
SPEED 2) each time you press the CON-
TROL switch. This lets you control the effect 
just as on an actual rotary speaker. (p.43 
Control switch settings)