Korg AX3000G Manual Do Utilizador

42

The expression pedal target is indicated as follows.

“*/######”

*: Target category 

######: Target parameter

In addition to the examples we’ve shown here, a wide variety of expression tar-
gets provided for each effect model can be freely assigned to the expression 
pedals.

If desired, you can make more detailed settings.

NOTE: For “--OFF--”, “VOLUME”, “M/PITCH”, “D/INPUT”, and “R/INPUT”, operat-
ing the expression pedal does not edit the parameter.

4. Turn value knob 2 to make the name display read “EXP MIN.” Here you can 

specify the PITCH value for when the pedal is at the minimum position (pedal 
back). Use value knob 2 or the 

▲/▼ buttons to adjust the setting.

5. Turn value knob 3 to make the name display read “EXP MAX.” Here you can 

specify the PITCH value for when the pedal is at the maximum position (pedal 
forward). Use value knob 3 or the 

▲/▼ buttons to adjust the setting.

When you operate the expression pedal, the target parameter will change 
within the range you specified here.

NOTE: When you change the expression target, the MIN and MAX values will be 
initialized.

6. Press the EXIT switch to return to the mode you were in.

NOTE: The changes you make will not be preserved in the internal memory unless 
you store the program.

“--OFF--”

--- OFF

(controls nothing)

“VOLUME”

---

Volume pedal

“P/DIRECT” --- 

DIRECT (mix amount of original sound) 
for a pre-effect (e.g., OCTAVE)

“M/SPEED”

--- (*: M (modulation)) SPEED of a modulation effect

“D/INPUT”

--- (*: D (delay))

Input level of a delay effect

“R/MIX”

--- (*: R (reverb))

MIX (mix amount of reverb sound) of a 
reverb effect

“A/GAIN”

--- (*: A (drive/amp))

GAIN of drive/amp model