Roland V-Synth Manual Do Utilizador
80
Settings Common to All Modes (System Mode)
V-LINK Settings (V-LINK)
Tx
fig.05-10_50
MIDI Channel (V-LINK MIDI Channel)
Specifies the channel used to transmit MIDI messages for V-LINK
control.
control.
Value:
1–16
Audio (V-LINK Audio Switch)
Specifies whether sound from the externally connected video device
will be played (ON) or not played (OFF).
will be played (ON) or not played (OFF).
Value:
OFF, ON
KBD Output (V-LINK Keyboard Output Fade
Switch)
Switch)
Specifies whether the video output from the video device will be
stopped (ON) or will not be stopped (OFF) when you are not
holding down a key.
stopped (ON) or will not be stopped (OFF) when you are not
holding down a key.
Value:
OFF, ON
Palette Local Sw (V-LINK Patch Palette Local
Switch)
Switch)
Specify whether you will press PATCH PALETTE NUMBER [1]–[8]
in V-Link mode to switch patches (ON) or not (OFF)
in V-Link mode to switch patches (ON) or not (OFF)
Value:
OFF, ON
TT Pad/Knob
fig.05-11_50
TT Pad Local Sw (V-LINK Time Trip Pad Local
Switch)
Switch)
Specify whether the Time Trip pad and the internal sound generator
will be disconnected in V-Link mode (OFF) or not disconnected (ON).
will be disconnected in V-Link mode (OFF) or not disconnected (ON).
Value:
OFF, ON
X Assign-XY (V-LINK X Assign-XY)
Specify the V-Link function that will be controlled when you operate
the Time Trip pad in the X (horizontal) direction in XY mode.
the Time Trip pad in the X (horizontal) direction in XY mode.
Value
OFF:
The time trip pad will not be used.
PLAYBACK-SPEED:
Playback speed
DISSOLVE-TIME:
Dissolve time (time over which the image
switches)
AUDIO LEVEL:
Volume during audio playback
COLOR-CB:
Color Cb (color-difference signal)
COLOR-CR:
Color Cr (color-difference signal)
BRIGHTNESS:
Brightness
VFX1:
Visual effects 1
VFX2:
Visual effects 2
VFX3:
Visual effects 3
VFX4:
Visual effects 4
OUTPUT-FADE:
Output fade
T-BAR:
T bar
Y Assign-XY (Link Y Assign-XY)
Specify the V-Link function that will be controlled when you operate
the Time Trip pad in the Y (vertical) direction in XY mode.
the Time Trip pad in the Y (vertical) direction in XY mode.
Value
OFF:
The time trip pad will not be used.
PLAYBACK-SPEED:
Playback speed
DISSOLVE-TIME:
Dissolve time (time over which the image
switches)
AUDIO LEVEL:
Volume during audio playback
COLOR-CB:
Color Cb (color-difference signal)
COLOR-CR:
Color Cr (color-difference signal)
BRIGHTNESS:
Brightness
VFX1:
Visual effects 1
VFX2:
Visual effects 2
VFX3:
Visual effects 3
VFX4:
Visual effects 4
OUTPUT-FADE:
Output fade
T-BAR:
T bar
Assign-TT (V-LINK Assign-Time Trip)
Specify the V-Link function that will be controlled when you operate
the Time Trip pad in Time Trip mode.
the Time Trip pad in Time Trip mode.
Value
OFF:
The time trip pad will not be used.
TIME-TRIP:
Time trip
Knob 1, 2 Local Sw (V-LINK Knob1, 2 Local
Switch)
Switch)
Specify whether the assignable controller knobs 1 or 2 will be
disconnected from the internal sound generator in V-Link mode
(OFF) or not disconnected (ON).
disconnected from the internal sound generator in V-Link mode
(OFF) or not disconnected (ON).
Value:
OFF, ON