Roland V-Synth Manual Do Utilizador

 

The V-Synth has two modes of USB functionality: 

 

 for 

transferring files, and 

 

 for sending and receiving MIDI 

messages. You must switch between these two modes on the V-
Synth; they cannot be used simultaneously.

 

Each mode can be used with the following operating systems.

• Windows 98 or later

• Mac OS 9.04 or later

 

The USB mode (file transfer/MIDI communication) must be 
switched before you connect the V-Synth with your computer. 
For the procedure, refer to 

 

 (p. 76).

 

By connecting the V-Synth with your computer via a USB cable, you 
can transfer files such as projects, patches, and wave data from 
internal memory or a PC card to and from the hard disk or other 
media of your computer, in order to back up your data.

You can use software on your computer to edit wave data you’ve 
created on the V-Synth. Conversely, wave data that you’ve created 
on your computer can be used on the V-Synth.

In this way, USB Storage mode lets you transfer files such as patch 
and waves to or from a connected computer.

 

Never connect or disconnect the USB cable or turn off the power 
while in USB mode or while data is being transferred.

 

You must switch the V-Synth to USB Storage mode before you 
connect the V-Synth and your computer with a USB cable.

 

With the factory settings, the V-Synth is set to USB Storage 
mode.

 

The SYSTEM Com Master screen appears.

 

fig.05-01_50

 

The SYSTEM Com MIDI/USB screen appears.

 

fig.05-03_50

 

The SYSTEM Com USB Setting window appears.

 

fig.05-03a_50

 

USB Storage mode will be selected.