Roland BR-900CD Manual Do Utilizador
194
Initializing the BR-900CD’s Settings
Initializing All the BR-900CD’s
Settings
Settings
The following settings are initialized together at one time.
• System Settings
• Effects (User Patches/Song Patches)
• Rhythm (Arrangements/Patterns/Drum Kits)
1. Press [UTILITY].
2. Press CURSOR [
] [
] to move the cursor to “INI,”
and press [ENTER].
fig.05-601d
3. Press PARAMETER CURSOR [
] [
] to move the
cursor to “ALL,” and press [ENTER].
The confirmation message “Are you sure?” appears in
the display.
the display.
fig.05-602d
4. To continue the initialization, press [ENTER] (YES).
To cancel, press [EXIT] (NO) (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
After the initialization has been completed, you are
returned to the Play screen.
returned to the Play screen.
You can perform the same initialization with “INIT
ALL,” by holding down INPUT SELECT [GUITAR/
BASS/MIC2], [MIC], and [LINE] while turning the
POWER switch ON, then pressing [ENTER].
ALL,” by holding down INPUT SELECT [GUITAR/
BASS/MIC2], [MIC], and [LINE] while turning the
POWER switch ON, then pressing [ENTER].
Initializing the System Settings
Follow the procedure below to initialize the system
parameters.
parameters.
A list of the initial settings for each parameter is given in the
“Parameter List” (p. 208).
“Parameter List” (p. 208).
1. Press [UTILITY].
2. Press CURSOR [
] [
] to move the cursor to “INI,”
and press [ENTER].
fig.05-603d
3. Press CURSOR [
] [
] to move the cursor to “SYS,”
and press [ENTER].
The confirmation message “Are you sure?” appears in
the display.
the display.
fig.05-604d
4. To continue the initialization, press [ENTER] (YES).
To cancel, press [EXIT] (NO) (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
After the initialization has been completed, you are
returned to the Play screen.
returned to the Play screen.