Roland 60S Manual Do Utilizador
185
Chapter 10 Connecting with External Device
Connecting External
Speakers or an external
Reverb Unit to Broaden the
Reverb (RSS Reverb)
Speakers or an external
Reverb Unit to Broaden the
Reverb (RSS Reverb)
The AT-90S/80S has an Aux Out jack on the bottom of the
instrument.
instrument.
By using this Aux Out jack to connect external speakers, you
can sound the reverb (reverberation) from the speakers. An
external reverb unit can also be connected and used to apply
reverb.
can sound the reverb (reverberation) from the speakers. An
external reverb unit can also be connected and used to apply
reverb.
■
Switching the Aux Out Mode
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch the Aux Out Mode setting to switch
between “AMBIENCE” and “TO EFFECTOR.”
between “AMBIENCE” and “TO EFFECTOR.”
Each time you touch the TV Format setting, it will
alternate between “AMBIENCE” and “TO EFFECTOR.”
alternate between “AMBIENCE” and “TO EFFECTOR.”
3.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
turned off.
■
Switching the Aux Out On/OFF
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch the Aux Out setting to switch between
“ON” and “OFF.”
“ON” and “OFF.”
Each time you touch the Aux Out setting, it will alternate
between “ON” and “OFF.”
between “ON” and “OFF.”
3.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
turned off.
AMBIENCE
The reverb sound applied by the
ATELIER will be output.
ATELIER will be output.
TO
EFFECTOR
EFFECTOR
Direct (unprocessed) sound for pro-
cessing by reverb will be output.
cessing by reverb will be output.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence