Roland HP201 Manual Do Utilizador
21
Performance
Adding Reverberation to the Sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it
sound as though you were performing in a concert hall.
sound as though you were performing in a concert hall.
fig.panel2-5
1.
Press the [REVERB/KEY TOUCH] button.
The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [REVERB/KEY TOUCH] button, getting its
indicator to go dark.
indicator to go dark.
■
Changing the Depth of the Reverb Effect
The amount (depth) of the reverb effect can be set to any of ten levels.
1.
Hold down the [REVERB/KEY TOUCH] button and press the “C ” or
“E ” key.
“E ” key.
Pressing the “C ” key as you hold down the [REVERB/KEY TOUCH] button reduces
the amount of reverb effect applied. Holding down the [REVERB/KEY TOUCH] button
and pressing the “E ” key increases the reverb effect.
the amount of reverb effect applied. Holding down the [REVERB/KEY TOUCH] button
and pressing the “E ” key increases the reverb effect.
2.
To restore the reverb depth to its factory-set state, hold down the
[REVERB/KEY TOUCH] button and press the “C ” and “E ” keys
simultaneously.
[REVERB/KEY TOUCH] button and press the “C ” and “E ” keys
simultaneously.
You can change the Depth of
the Reverb Effect by pressing
any “C ” or “E ” key.
the Reverb Effect by pressing
any “C ” or “E ” key.
Press
While holding down
the [Reverb/Key Touch]
button...
the [Reverb/Key Touch]
button...
This is set to “4” when the
HP201 is shipped from the
factory.
HP201 is shipped from the
factory.
HP201_e.book 21 ページ 2007年1月15日 月曜日 午後5時37分