Edirol SD-80 Manual Do Utilizador
26
Using the internal sound generator
Selecting a sound
If the part type is Inst, use the following procedure to select a sound. First make sure that the part type is
Inst. For details on how to set the part type to Inst, refer to
Inst. For details on how to set the part type to Inst, refer to
On the SD-80, the sound of an Inst part is specified by two numbers: an
Instrument number
and a
Variation number
. There are 128 sounds whose
variation number
is 000, and these make up the basic
sounds of the SD-80. These are referred to as “
capital sounds
.”
By changing the MIDI bank number of these sounds, you can select variations that have a different tonal
character. These are called “
character. These are called “
variation sounds
.” For details on the various sounds that can be selected,
fig.5-06
1.
Press
[INST]
.
The button will light.
fig.5-06a_67.2
2.
Press
[PAGE
]
until the display indicates
Inst
Number
.
3.
Turn the
[VALUE]
dial to select a capital sound.
The
sound name
and
Inst Number
shown in the display will also change.
4.
Press
[PAGE
]
until
Variation
appears.
In GS mode, this will be displayed with
Bank
.
5.
Turn the
[VALUE]
dial to select a variation sound.
The
sound name
and
Inst Number
shown in the display will also change.
6.
Press
[INST]
once again to return to the main screen.
1,6
2,4
3,5
Convenient functions
You can also use the following method to select a sound.
After step 1, if you turn the [VALUE] dial, any sound in the current sound set can be selected.