Roland AT-350C Manual Do Utilizador

18

Connect your computer for transferring performance data (p. 113).

Connect an external MIDI device here to transfer performance data (p. 113).

You can connect an audio source here (p. 111).

By connecting speakers or an external reverb unit here, you’ll be able to much more readily express the expansiveness of the stereo sound field and 

add more of a sense of presence to your music (p. 112).

Connect an expression pedal (EV-7; sold separately) or pedal switch (DP series; sold separately) to these jacks (p. 26).

To listen to the ATELIER’s sound through speakers, connect your audio system or speakers to these jacks.

Connect the pedalboard (PK series; sold separately) to this socket (p. 24).

Connect the included AC adaptor here (p. 21).

Depending on the circumstances of a particular setup, you may experience a discomforting sensation, or perceive that the surface feels gritty to 

the touch when you touch this device, or the metal portions of other objects. This is due to an infinitesimal electrical charge, which is absolutely 

harmless. 

However, if you are concerned about this, connect the ground terminal (see figure) with an external ground. When the unit is grounded, a slight 

hum may occur, depending on the particulars of your installation. If you are unsure of the connection method, contact the nearest Roland Service 

Center, or an authorized Roland distributor, as listed on the “Information” page.
Unsuitable places for connection

•  Water pipes (may result in shock or electrocution)
•  Gas pipes (may result in fire or explosion)
•  Telephone-line ground or lightning rod (may be dangerous in the event of lightning)