Roland RG-1 Manual Do Utilizador
38
Performance
Dividing the keyboard into right-hand and left-hand areas, then playing
different sounds in each is called “Split performance.”
different sounds in each is called “Split performance.”
The boundary key is called the “split point.”
The split point key is included in the left-hand keyboard area.
fig.03-290
1
2
Press the [Function] (Exit) button, getting its indicator to light.
3
Press the [Song] (Select -) button or [
] (Select +) button to
display the SPLIT screen.
fig.03-300d
4
Press the [Song] (Select -) button or [
] (Select +) button to get
the value for “Split” to flash.
fig.03-310d
5
Press the [
] (Value +) button to select “On.”
The keyboard is divided into right-hand and left-hand areas.
The tone played prior to Split performance is selected for the right hand, and
a suitable tone to match that tone is selected for the left hand automatically.
a suitable tone to match that tone is selected for the left hand automatically.
6
To exit Split performance, press the [
] (Value -) button to set
the “Split” setting to “Off.”
Playing Different Tones with the Left and
Right Hands (Split Performance)
Right Hands (Split Performance)
You can change the split
point; refer to “Changing
the Keyboard’s Split Point”
(p. 39).
point; refer to “Changing
the Keyboard’s Split Point”
(p. 39).
Split Point (Factory setting: F#3)
C1 D1 E1 F1 G1 A1 B1
A0 B0
C2
C3
C4
C5
C8
B7
…
Left-hand Tone
Right-hand Tone
You can switch Split function
on and off by holding down
one of the tone buttons and
pressing the [Song] button.
on and off by holding down
one of the tone buttons and
pressing the [Song] button.
The Tone screen appears as
shown below when the Split
function is on.
shown below when the Split
function is on.
Pressing a Tone button once
more cancels the Split
function.
more cancels the Split
function.
RG-1_e.book 38 ページ ２００８年４月８日 火曜日 午後２時３６分