Roland RD-300GX Manual Do Utilizador
64
Detailed Settings for Each Function ([EDIT] Button)
Functions that affect the RD-300GX’s overall operating
environment are called “System functions.”
environment are called “System functions.”
For a cleaner ensemble sound while performing with one or
more other instruments, ensure that each instrument’s basic
pitch is in tune with that of the other instruments. In general,
the tuning of an instrument is indicated by the pitch in Hertz
(Hz) of the middle “A” note.
more other instruments, ensure that each instrument’s basic
pitch is in tune with that of the other instruments. In general,
the tuning of an instrument is indicated by the pitch in Hertz
(Hz) of the middle “A” note.
Adjusts the volume of the entire RD-300GX.
You can use a control pedal connected to the CONTROL
PEDAL jack to switch between RD-300GX Setups.
PEDAL jack to switch between RD-300GX Setups.
Zone Parameter
Key Transpose
Pan
Damper Pedal Switch
Control Pedal Switch
Bender Switch
Modulation Switch
S1 Switch
S2 Switch
Part Switch
Switch
File
Save SETUP
Load SETUP
Delete SETUP
Copy SETUP
Delete SONG
Copy SONG
Format
Song Function
Play Mode
Playback Transpose
Center Cancel
Utility
Rec Mode
Local Control
Bulk Dump
Factory Reset Current Setup
Factory Reset All
Making System Settings
(System)
(System)
Tuning to Other Instrument’s Pitches
(Master Tune)
(Master Tune)
Parameter
Value
Master Tune
415.3–440.0–466.2
Adjusting the Volume
(Master Volume)
(Master Volume)
Parameter
Value
Master Volume
0–127
Using a Control Pedal to Switch Setups
(SETUP Pedal Sft)
(SETUP Pedal Sft)
Parameter
Value
Description
SETUP Pedal
Sft
(SETUP
Pedal Shift)
Sft
(SETUP
Pedal Shift)
OFF
The pedal will perform the function
assigned in “Control Pedal
Function” (p. 68) of the
“COMMON” menu.
assigned in “Control Pedal
Function” (p. 68) of the
“COMMON” menu.
ON
Each time you press the pedal, the
Setup will be switched in ascending
order.
* If you choose this setting, the
function assigned in “Control Pedal
Function” of the “COMMON”
menu will be disabled.
Setup will be switched in ascending
order.
* If you choose this setting, the
function assigned in “Control Pedal
Function” of the “COMMON”
menu will be disabled.
RD-300GX_e.book 64 ページ ２００８年２月１４日 木曜日 午後１時２６分