Roland V-Synth GT Manual Do Utilizador

 

fig.04-06_50

 

STEREO L R

Samples in stereo.

MONO MIX

Mixes the signals input to L and R, and sample in monaural.

MONO L

Samples the L input signal in monaural.

MONO R

Samples the R input signal in monaural.

 

ANALOG

Samples from INPUT jacks or MIC IN jack.

USB

The sound from USB audio will be sampled.

OPTICAL

Samples from OPTICAL IN connector.

COAXIAL

Samples from COAXIAL IN connector.

RESAMPL

Select this when you wish to resample. The sound that is output to MAIN OUT 
L/MONO and R will be sampled.

 

MANUAL

Sampling will begin when you touch <START>.

MIDI

Sampling will begin when an external sequencer start message (system real-
time message: FA) is received.

LEVEL

Sampling will start when the input signal exceeds the level specified by the 
Trigger Level setting.

NOTE

Sampling will begin when you play the keyboard or note message is re-
ceived.

 

-

 

∞

 

–00 dB

Specifies the input level at which sampling will begin when the Trigger Mode 
is set to “LEVEL.” The trigger level is shown by the “

” and “

” in the 

level meter located at the right of the screen.

 

If Trigger Mode is set to other than “LEVEL,” this parameter has no effect.

 

0–1000 msec

After the selected trigger to start sampling has been received, previously re-
ceived data for the length of time specified here will be included in the sam-
pled data. When the Trigger Mode is set to “LEVEL” and the early portion of 
the sample is being lost, you can use this setting to include the early portion.

 

-12– +36 dB

Adjusts the input gain. This will apply to the sound that is received from all 
input jacks. It will also be applied to the sound being resampled. With posi-
tive (+) values, the gain will be higher than originally, and with negative (-) 
values the gain will be lower than originally.

V-Synth-GT_e.book 174 ページ ２００７年４月９日　月曜日　午後１時４６分