Roland V-Synth GT Manual Do Utilizador

 

fig.08-11.eps_50

 

Light

Sets the keyboard sensitivity to “light.”

Medium

Sets the keyboard sensitivity to “normal.”

Heavy

Sets the keyboard sensitivity to “heavy.”

 

REAL, 1–127

Specifies the velocity value that will be transmitted 
when you play the keyboard. If you want actual key-
board velocity to be transmitted, set this to “REAL.” If 
you want a fixed velocity value to be transmitted re-
gardless of how you play, specify the desired value 
(1–127).

 

0–200

Specifies the Aftertouch sensitivity. Higher values will 
allow Aftertouch to be applied more easily. Normally 
you will leave this at “100.”

 

OFF, ON

The Local Switch determines whether the internal 
sound generator is disconnected (OFF) from the con-
troller section (keyboard, pitch bend/modulation le-
ver, knobs, buttons, Time Trip Pad, D Beam 
controller, pedal, and so on); or not disconnected 
(ON). Normally this is left “ON,” but if you wish to 
use the V-Synth GT’s keyboard and controllers to con-
trol only external sound modules, set it to “OFF.”

V-Synth-GT_e.book 203 ページ ２００７年４月９日　月曜日　午後１時４６分