Roland V-Piano Manual Do Utilizador

 

Introducing the V-Piano

 

fig.framework.eps

 

This section contains the keyboard, foot controllers such as the pedals, and also includes the panel buttons and knobs. 

The information generated as the result of playing the keyboard and operating the controllers is sent to the sound generator section.

 

This section produces the V-Piano’s sounds. The sounds are generated according to the performance data received from the controller 

section and from external MIDI devices, and sent as an audio signal from the OUTPUT jacks and the headphone jack.

 

When shipped from the factory, the V-Piano contains 24 “preset tones.”

The V-Piano can internally store 100 user tones.

 

A “setup” is a choice of tone together with settings such as pedal assignments.

 

When you switch on the V-Piano’s power, setup number 001 will be selected automatically. If you save your favorite tone 

and settings in setup number 001, that sound and those settings will be available to play as soon as you switch on the V-

Piano.

 

Settings used by the entire V-Piano are called “system parameters” (p. 80). The values of the system parameters do not change when 

you switch setups or tones.

If you don’t want settings such as pedal settings to change when you switch setups, you can save these settings as system parameters.

 

How the V-Piano is structured

The V-Piano’s parameters

V-Piano_e.book 27 ページ ２００９年１月２８日　水曜日　午前９時１０分