Yamaha Tyros3 Manual Do Utilizador
Installing the Optional S
peakers
100
• Tyros3 Owner’s Manual
Installing the Optional Speakers
Make sure that you have all of the parts below, included in the TRS-MS02 speaker package.
1
Turn the Tyros3’s power off, and disconnect the AC power
cord. Also, make sure to disconnect the keyboard from any
other external devices.
cord. Also, make sure to disconnect the keyboard from any
other external devices.
2
Insert the two speaker brackets to the rear panel of the Tyros3.
3
Fasten the satellite speakers to the left and right brackets.
4
Use the RCA pin cables to connect the speakers to the respec-
tive outputs on the Tyros3.
tive outputs on the Tyros3.
Appendix
Satellite
speakers (2)
speakers (2)
Subwoofer
speaker (1)
speaker (1)
Speaker
brackets (2)
brackets (2)
RCA pin
cables (2)
cables (2)
RCA pin/8-pin
combination cable (1)
combination cable (1)
Either bracket can be fastened to either
location.
location.
NOTE
Use the outside
slots (as shown).
slots (as shown).
Either speaker can be placed on either
bracket.
bracket.
If you want to change the direction of
the satellite speaker, unfasten it from the
bracket by rotating the lever, then adjust
the speaker position as desired, and
fasten it to the bracket again.
the satellite speaker, unfasten it from the
bracket by rotating the lever, then adjust
the speaker position as desired, and
fasten it to the bracket again.
NOTE
NOTE
Place the speaker on
the bracket.
the bracket.
Adjust the direction of the speaker as desired,
then fasten it securely to the bracket.
then fasten it securely to the bracket.
Either cable can be used for either loca-
tion.
tion.
NOTE