Yamaha N3 Manual Do Utilizador

Página de 49
40
• N3/N2
Owner’s Manual
ENGLISH
Troubleshooting
The message list (page 39) is also provided for your reference.
Problem
Possible Cause and Solution
The instrument does not turn on.
The instrument has not been plugged in properly. Securely insert the female plug into 
the socket on the instrument, and the male plug into a proper AC outlet (page 10).
Noise is heard from the speakers or head-
phones.
The noise may be due to interference caused by the use of a mobile phone in close 
proximity to the instrument. Turn off the mobile phone, or use it further away from the 
instrument.
The overall volume is low, or no sound is 
heard.
• The Volume is set too low: set it to an appropriate level using the [MASTER VOL-
• Make sure a pair of headphones is not connected to the headphones jack (page 14).
Sound is still heard from the instrument even 
though headphones are plugged in.
When the TRS is on, sound can be heard slightly even if the headphones are con-
nected. Turn the TRS off to mute all sound other than the headphones (page 23).
Sound is still heard from the instrument even 
though the volume is set to the minimum. 
When the TRS (page 23) is on, sound can be heard to some degree even when the 
volume is set to the minimum. This is normal, and is not a malfunction. 
The pitch and/or tone of the Piano Voices in 
certain ranges do not sound right.
The Piano Voices attempt to precisely simulate actual piano sounds. However, as a 
result of sampling algorithms, overtones in some ranges may sound exaggerated, pro-
ducing a somewhat different pitch or tone. This is normal, and no cause for concern.
Sound is not heard on a particular key.
Keyboard may not function normally if the key was pressed when the power was 
turned on. Turn off the power and turn it again to reset the function. Do not touch any 
keys when turning the power on.
Sound input to the AUX IN jacks is inter-
rupted.
The output volume of the external device connected to this instrument is too low. 
Increase the output volume of the external device. The volume level reproduced via 
this instrument's speakers can be adjusted by using the [MASTER VOLUME] control.
The damper pedal has no effect.
(N3)
 The pedal cord may not be properly connected. Make sure to securely insert 
the pedal cord into the pedal jack (page 42).
(N2)
 The damper pedal was pressed when the power was turned on. This is not a 
malfunction; press the pedal again to reset the function. 
The USB flash memory device has hung up 
(stopped).
• Disconnect the device and connect it to the instrument again.
• The USB flash memory is not compatible with the instrument. Only use the USB 
flash memory device whose compatibility has been confirmed by Yamaha (page 30).
Maintenance
When the surface of the instrument loses luster, wipe the instrument evenly with a cloth moistened with some special piano 
cleaner. For more information, contact the store where you purchased the instrument.
38