Yamaha N3 Manual Do Utilizador

Owner’s Manual

ENGLISH

* Please keep this manual in a safe place for future reference.

• Only use the voltage specified as correct for the instrument. The required 

voltage is printed on the name plate of the instrument.

• Check the electric plug periodically and remove any dirt or dust which may have 

accumulated on it.

• Use only the supplied power cord/plug.

• Do not place the power cord near heat sources such as heaters or radiators, and 

do not excessively bend or otherwise damage the cord, place heavy objects on 
it, or place it in a position where anyone could walk on, trip over, or roll anything 
over it.

• Do not open the instrument or attempt to disassemble the internal parts or 

modify them in any way. The instrument contains no user-serviceable parts. If it 
should appear to be malfunctioning, discontinue use immediately and have it 
inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet 

conditions, or place containers on it containing liquids which might spill into 
any openings. If any liquid such as water seeps into the instrument, turn off the 
power immediately and unplug the power cord from the AC outlet. Then have 
the instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. 

A burning item may fall over and cause a fire.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden 

loss of sound during use of the instrument, or if any unusual smells or smoke 
should appear to be caused by it, immediately turn off the power switch, 
disconnect the electric plug from the outlet, and have the instrument inspected 
by qualified Yamaha service personnel.

• When removing the electric plug from the instrument or an outlet, always hold 

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used 

for extended periods of time, or during electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-connector. 

Doing so can result in lower sound quality, or possibly cause overheating in the 
outlet.

• Read carefully the attached documentation explaining the assembly process. 

Failure to assemble the instrument in the proper sequence might result in 
damage to the instrument or even injury. 

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or 

heat (such as in direct sunlight, near a heater, or in a car during the day) to 
prevent the possibility of panel disfiguration or damage to the internal 
components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, 

mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio 
may generate noise.

• Do not place the instrument in an unstable position where it might accidentally 

fall over.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is 

easily accessible. If some trouble or malfunction occurs, immediately turn off 
the power switch and disconnect the plug from the outlet. Even when the power 
switch is turned off, electricity is still flowing to the product at the minimum 
level. When you are not using the product for a long time, make sure to unplug 
the power cord from the wall AC outlet.

• Before connecting the instrument to other electronic components, turn off the 

power for all components. Before turning the power on or off for all 
components, set all volume levels to minimum. Also, be sure to set the volumes 
of all components at their minimum levels and gradually raise the volume 
controls while playing the instrument to set the desired listening level.

• In the case of a model with a polished finish, gently remove dust and dirt with a 

soft cloth. Do not wipe too hard since small particles of dirt can scratch the 
instrument’s finish.

• When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use 

paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping 
cloths.

• During extreme changes in temperature or humidity, condensation may occur 

and water may collect on the surface of the instrument. If water is left, the 
wooden parts may absorb the water and be damaged. Make sure to wipe any 
water off immediately with a soft cloth.

(1)B-13

  1/2

4