Yamaha MM8 Manual Do Utilizador
Handy Performance Features
MM6/MM8 Owner’s Manual
49
◆ Pitch Changes in Semitone Increments
(Transpose)
The overall pitch of the instrument can be shifted
up or down by a maximum of one octave in
semitone increments.
1
Press one of the TRANSPOSE [+] / [-]
buttons. The value is shown in the dis-
play, indicating the amount of transpo-
sition over or below the normal value.
buttons. The value is shown in the dis-
play, indicating the amount of transpo-
sition over or below the normal value.
2
Use the dial to set the transpose value
between -12 and +12 as required.
between -12 and +12 as required.
Press the [EXIT] button to return to the MAIN
display.
Pressing the TRANSPOSE [+] / [-] buttons
briefly allows single-step changes.
Pressing and holding either TRANPOSE [+] /
[-] button continuously increases or decreases
the value.
display.
Pressing the TRANSPOSE [+] / [-] buttons
briefly allows single-step changes.
Pressing and holding either TRANPOSE [+] /
[-] button continuously increases or decreases
the value.
◆ Fine Pitch Changes (Tuning)
The overall tuning of the instrument can by shifted
The overall tuning of the instrument can by shifted
up or down by a maximum of 1 semitone in
approximately 0.2-Hz steps. The default setting is
440Hz.
1
Press the [UTILITY] button to go to the
UTILITY display.
UTILITY display.
2
Use the CATEGORY [DEC] / [INC] but-
tons to select the Tuning item.
tons to select the Tuning item.
3
Use the dial to set the tuning value
between 415.3 and 466.2Hz as required.
between 415.3 and 466.2Hz as required.
Transpose the Keyboard
Current Value
• This setting does not affect Drum Kit Voices.
NOTE
• Press either the [INC/YES] and [DEC/NO] buttons or TRANSPOSE
[+] and [-] buttons simultaneously to recall the initial default value.
NOTE
The Range is 415.3–466.2 Hz
Tuning
• This setting does not affect Drum Kit Voices.
NOTE
• Press the [INC/YES][DEC/NO] buttons simultaneously to instantly
reset to the default setting.
NOTE