Yamaha MM8 Manual Do Utilizador
64
MM6/MM8 Owner’s Manual
Utility Settings
Detailed settings such as tuning, split point, and effects can be made via the UTILITY
screen.
screen.
There are 25 function parameters in all.
1
2
Press the [UTILITY] button to go to the
UTILITY display.
UTILITY display.
3
Press the CATEGORY [DEC] and [INC]
buttons as many times as necessary
until the function’s display name
appears in the display.
buttons as many times as necessary
until the function’s display name
appears in the display.
Refer to the function list on page 65.
The name of the previous item in the list
appears to the upper left, and the name of the
next item in the list appears to the upper right
of the currently selected item.
The name of the previous item in the list
appears to the upper left, and the name of the
next item in the list appears to the upper right
of the currently selected item.
4
Use the dial or [DEC/NO] and [INC/YES]
buttons to set the value.
buttons to set the value.
On/off type settings can be turned ON by
pressing the [INC/YES] button, and OFF by
pressing the [DEC/NO] button.
In some cases the [INC/YES] button will ini-
tiate execution of the selected function, and the
[DEC/NO] will cancel the selection.
Press the [INC/YES][DEC/NO] buttons simul-
taneously to instantly reset to the default set-
tings (except for initial MIDI setup).
pressing the [INC/YES] button, and OFF by
pressing the [DEC/NO] button.
In some cases the [INC/YES] button will ini-
tiate execution of the selected function, and the
[DEC/NO] will cancel the selection.
Press the [INC/YES][DEC/NO] buttons simul-
taneously to instantly reset to the default set-
tings (except for initial MIDI setup).
Utility settings are memorized as soon as they
are changed. However, items saved to the per-
formance memory are saved as performance
data.
To restore all initial factory default settings per-
form the “Backup Clear” procedure described
in the “Initialization” section on page 35.
are changed. However, items saved to the per-
formance memory are saved as performance
data.
To restore all initial factory default settings per-
form the “Backup Clear” procedure described
in the “Initialization” section on page 35.
Selecting and Setting Functions
Previous item
UTILITY group
Next item
Currently selected item
Parameter
• Increment
value by 1.
• ON
• Execute
• Execute
• Decrement
value by 1.
• OFF
• Cancel
• Cancel
Press simultaneously to
recall the default setting.
recall the default setting.