Yamaha professional workstation Manual Do Utilizador

MIDI Functions

MIDI Functions

System Settings

The explanations here apply to step #5 of the Basic Procedure on page 174.

■

“Local Control” refers to the fact that, normally, the 9000Pro keyboard controls the internal tone generator, 
allowing the internal voices to be played directly from the keyboard. This condition is referred to as “Local Con-
trol on” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned 
off, however, so that the keyboard does not play the internal voices, but the appropriate MIDI information is still 
transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal 
tone generator can respond to MIDI information received on channels set to the “XG/GM” mode via the MIDI 
IN connector. This means that while an external MIDI sequencer, for example, plays the 9000Pro internal voices, 
an external tone generator can be played from the 9000Pro keyboard.

■

●

Determines whether the 9000Pro is controlled by its own internal clock or a MIDI clock signal received from an external 
device. INTERNAL is the normal Clock setting when the 9000Pro is being used alone. If you are using the 9000Pro with 
an external sequencer, MIDI computer, or other MIDI device, and you want the 9000Pro to be synchronized to the external 
device, set this function to EXTERNAL. In the latter case, the external device must be connected to the 9000Pro MIDI IN 
connector, and must be transmitting an appropriate MIDI clock signal.

●

Turns MIDI clock transmission on or off. 
When set to OFF, no MIDI clock or START/STOP data is transmitted.

●

When the RECEIVE TRANSPOSE parameter is set to OFF, note data received by the 9000Pro is not transposed, and 
when set to ON, the received note data is transposed according to the current 9000Pro song transpose setting.

●

■

The SYS/EX. TRANSMIT parameter turns MIDI transmission of MIDI system exclusive message data on or off. 
The SYS/EX. RECEIVE parameter turns MIDI reception of MIDI exclusive data generated by external equip-
ment on or off. The CHORD SYS/EX. TRANSMIT parameter turns MIDI transmission of MIDI chord exclusive 
data (chord detect — root and type) on or off. The CHORD SYS/EX. RECEIVE parameter turns MIDI reception 
of MIDI chord exclusive data generated by external equipment on or off.

Transmit Settings

This display page allows you to specify which 9000Pro voices and parts will be transmitted via which MIDI 
channels (there are 32 MIDI channels), and to specify which types of data will be transmitted for each channel.
The explanations here apply to step #5 of the Basic Procedure on page 174.

The Tx MONITOR (transmit 
monitor)  indicates when data is 
being transmitted on any of the 
32 MIDI channels: The dots cor-
responding to each channel (1- 
32) flash briefly whenever any 
data is transmitted on the chan-
nel(s).

Turn transmission of the specified 
data type on or off. 
See the next page for details on 
the data types.

Select a Part for the selected channel.

Select a 
Channel.

173