Yamaha F11 Manual Do Utilizador

Página de 78
ENGLISH
Data Backup (F01)
F11/F01 Owner’s Manual
57
Data Backup (F01)
Backup Data in Internal Memory
The following data will be saved to internal memory of the instrument. The data is maintained even when the power is 
turned off.
• Metronome Volume/Time Signature
• Fine Tuning of the Pitch
• Character Code
Initializing the data
Turn off the power to the instrument. Then turn the power on while holding the C7 key.
Backing Up Data to a Computer
In order to back up data from the instrument to a computer, you must first download 
Musicsoft Downloader from the Yamaha website (below), and install it on your com-
puter.
http://music.yamaha.com/download/
System requirement for Musicsoft Downloader
For maximum data security Yamaha recommends that you use Musicsoft Downloader 
to save your important data to a computer. This important data includes backup data 
in internal memory of the instrument (page 55) and the recorded performance 
(page 38). For information on saving backup data from the instrument to a computer, 
refer to “Transferring Data Between the Computer and Instrument (for unprotected 
data)” in the Help file that came with Musicsoft Downloader.
Restoring the Backup Data
The backup data "F01.bup" on a computer can be restored to the instrument. For 
information on loading song data from a computer to this instrument, refer to “Trans-
ferring Data Between the Computer and Instrument (for unprotected data)” in the 
Help file that came with Musicsoft Downloader.
C7
NOTE
You can download Musicsoft 
Downloader without charge 
from the Yamaha website.
CAUTION
Do not turn off the power to 
the instrument or unplug 
the instrument during data 
transmission. Otherwise, the 
data will not be saved. Fur-
thermore, USB flash mem-
ory operation may become 
unstable, causing the entire 
memory to be erased when 
you turn the power to the 
instrument on or off.
NOTE
Before you use this instrument, 
close the Musicsoft Downloader 
window and quit the application.
NOTE
The backup data file is automat-
ically named "F01.bup."
• OS : Windows
®
 98SE/Me/2000/XP/Vista
• CPU : Intel
®
 Pentium
®
 or Celeron
®
 chip of 233MHz or higher (500MHz or 
higher recommended)
• Memory : 64MB or higher (256MB or higher recommended)
• Available hard disk capacity: 128MB or higher (512MB or higher recommended)
• Display : 800 
× 600 High Color (16-bit)
• Others : Microsoft
®
 Internet Explorer
®
 version 5.5 or higher