Yamaha CVP-501 Manual Do Utilizador
106
CVP-509/505/503/501 Owner’s Manual
Connections
– Using
Y
our Instr
ument with Other De
vices –
10
By connecting a USB storage device to the instrument’s [USB TO DEVICE] terminal, you can save data you’ve
created to the device.
created to the device.
Connecting a USB Storage Device
Precautions when using the [USB TO
DEVICE] terminal
When connecting a USB device to the terminal, be sure to
handle the USB device with care. Follow the important pre-
cautions below.
handle the USB device with care. Follow the important pre-
cautions below.
For more information about the handling of USB devices, refer to the owner’s
manual of the USB device.
manual of the USB device.
■ Compatible USB devices
• USB storage devices (flash memory, floppy disk drive,
hard disk drive, etc.)
• USB-LAN adaptor
• USB hub
• USB hub
The instrument does not necessarily support all commer-
cially available USB devices. Yamaha cannot guarantee oper-
ation of USB devices that you purchase. Before purchasing a
USB device for use with this instrument, please visit the fol-
lowing web page:
http://music.yamaha.com/download/
cially available USB devices. Yamaha cannot guarantee oper-
ation of USB devices that you purchase. Before purchasing a
USB device for use with this instrument, please visit the fol-
lowing web page:
http://music.yamaha.com/download/
Other USB devices such as a computer keyboard or mouse cannot be used.
■ Connecting a USB device
•
When connecting a USB device to the [USB TO
DEVICE] terminal, make sure that the connector on the
device is appropriate and that it is connected in the
proper direction.
DEVICE] terminal, make sure that the connector on the
device is appropriate and that it is connected in the
proper direction.
When connecting a USB device to the [USB TO DEVICE] terminal on
the top panel, remove it before closing the key cover. If the key
cover is closed with the USB device connected, the USB device may
be damaged.
the top panel, remove it before closing the key cover. If the key
cover is closed with the USB device connected, the USB device may
be damaged.
• If you intend to connect two or three devices at the same
time to a terminal, you should use a USB hub device.
The USB hub must be self-powered (with its own power
source) and the power must be on. Only one USB hub
can be used. If an error message appears while using the
USB hub, disconnect the hub from the instrument, then
turn on the power of the instrument and re-connect the
USB hub.
The USB hub must be self-powered (with its own power
source) and the power must be on. Only one USB hub
can be used. If an error message appears while using the
USB hub, disconnect the hub from the instrument, then
turn on the power of the instrument and re-connect the
USB hub.
• Though the instrument supports the USB 1.1 standard,
you can connect and use a USB 2.0 storage device with
the instrument. However, note that the transfer speed is
that of USB 1.1.
the instrument. However, note that the transfer speed is
that of USB 1.1.
Using USB Storage Devices
By connecting the instrument to a USB storage device, you
can save data you’ve created to the connected device, as well
as read data from the connected device.
can save data you’ve created to the connected device, as well
as read data from the connected device.
Although CD-R/RW drives can be used to read data to the instrument, they can-
not be used for saving data.
not be used for saving data.
■ The number of USB storage device to be used
Up to two USB storage devices can be connected to the
[USB TO DEVICE] terminal. (If necessary, use a USB hub.
The number of USB storage devices that can be used simul-
taneously with musical instruments even when a USB hub is
used is a maximum of two.) This instrument can recognize
up to four drives in one USB storage device.
[USB TO DEVICE] terminal. (If necessary, use a USB hub.
The number of USB storage devices that can be used simul-
taneously with musical instruments even when a USB hub is
used is a maximum of two.) This instrument can recognize
up to four drives in one USB storage device.
■ Formatting USB storage media
When a USB storage device is connected or media is
inserted, a message may appear prompting you to format the
device/media. If so, execute the Format operation (page 107).
inserted, a message may appear prompting you to format the
device/media. If so, execute the Format operation (page 107).
The format operation overwrites any previously existing data. Make
sure that the media you are formatting does not contain important
data. Proceed with caution, especially when connecting multiple
USB storage media.
sure that the media you are formatting does not contain important
data. Proceed with caution, especially when connecting multiple
USB storage media.
■ To protect your data (write-protect)
To prevent important data from being inadvertently erased,
apply the write-protect provided with each storage device or
media. If you are saving data to the USB storage device,
make sure to disable write-protect.
apply the write-protect provided with each storage device or
media. If you are saving data to the USB storage device,
make sure to disable write-protect.
■ Connecting/removing USB storage device
Before removing the media from the device, make sure that
the instrument is not accessing data (such as in the Save,
Copy and Delete operations).
the instrument is not accessing data (such as in the Save,
Copy and Delete operations).
Avoid frequently turning the power on/off to the USB storage
device, or connecting/disconnecting the device too often. Doing so
may result in the operation of the instrument “freezing” or hanging
up. While the instrument is accessing data (such as during Save,
Copy, Delete, Load and Format operations) or is mounting the USB
storage device (shortly after the connection), do NOT unplug the
USB connector, do NOT remove the media from the device, and do
NOT turn the power off to either device. Doing so may corrupt the
data on either or both devices.
device, or connecting/disconnecting the device too often. Doing so
may result in the operation of the instrument “freezing” or hanging
up. While the instrument is accessing data (such as during Save,
Copy, Delete, Load and Format operations) or is mounting the USB
storage device (shortly after the connection), do NOT unplug the
USB connector, do NOT remove the media from the device, and do
NOT turn the power off to either device. Doing so may corrupt the
data on either or both devices.
NOTE
NOTE
CAUTION
NOTE
CAUTION
CAUTION