Yamaha RY20 Manual Do Utilizador

Other Pattern Functions

You can modify the velocity settings for an entire track. This function 
allows you to change the rate of velocity and the offset from the 
recorded values.

Press the 

[PATTERN] button to put the RY20 into Pattern Mode. Select a 

pattern by rotating the Jog Dial or using the 

[ +1 ] and [ –1 ] buttons.

Select Velocity display page by pressing the 

[PAGE+] button until the 

display indicates “

VELCTY

” and the current rate flashes. Also notice that 

one of the track “ ” indicators is lit.

Select the track you wish to modify with the Track Select/Mute buttons. 
When you press a button, the track “ ” indicator for the current track 
switches off as the indicator corresponding to the selected track lights up.

Alter the velocity rate by rotating the Jog Dial or using the 

[ +1 ] and [ –1 ] 

buttons.

The default rate is “

100%

” which is the normal setting. The range is from 

“

000%

” to “

200%

”. As you lower the rate below “

100%

”, all of the velocity 

settings are correspondingly reduced. When you raise the rate above 
“

100%

”, the velocity settings are correspondingly increased.

Change the focus to the “

LEVEL

” prompt using the 

[ > ] cursor button.

■

PAGE –

PAGE +

PATTERN

A CHASE

LEVEL

MAIN  A

PAD BANK

OTHERS

HH
SD
BD

OTHERS

HH

SD

BD

TRACK
SELECT/
MUTE

PATTERN

A CHASE

PAD BANK

OTHERS

HH
SD
BD