Yamaha RY20 Manual Do Utilizador

Página de 140
59
Other Pattern Functions
6
Copy the selected tracks of the current section by pressing the 
[ ENTER ] 
button. The prompt “
END
” will momentarily appear on the LCD.
When you see the “
END
” prompt, the RY20 has completed copying the 
selected tracks from the source pattern to the destination pattern.
7
Select another section to copy by pressing the appropriate Drum Pad 
button while holding the 
[SECTION] button.
The pad bank selection and the tempo, swing, groove, and velocity settings 
of the source pattern are copied to the destination pattern.
NOTE
If the source pattern contains a lot of data, you may see the prompt “
PLEASE WAIT
” 
as the RY20 copies the data to the destination pattern.
IMPORTANT
If you decide that you DO NOT want to copy a pattern, you can cancel this 
operation by simply selecting another function. There are several ways to do this:
Press the 
[PATTERN]
 button to return to Pattern Mode.
Press the 
[ PAGE+ ]
 or 
[ PAGE– ]
 buttons to select another display page.
WARNING
When you press the 
[ ENTER ]
 button, the copy operation will be performed. It is not 
possible to recover data that you have lost by overwriting the pattern.
PLEASE BE CERTAIN THAT THIS IS WHAT YOU INTEND TO DO.
NOTE
If you forget to select any tracks, the RY20 will prompt you with the error message 
SELECT TRACK
”.
NOTE
If you attempt to copy a track from the source pattern to a destination pattern that 
already contains data and the destination pattern has a different time signature 
from the source pattern, the message “
TS NOT MATCH
” will momentarily appear on 
the display. This means the time signatures do not match. Select an empty 
destination pattern or one with the same time signature as the source pattern.
SIDE
STICK
8
MAIN B
SECTION