Yamaha RY20 Manual Do Utilizador
87
Modifying the Drum Kits
Define the stereo pan for a drum pad.
1
Select the Pan display page by pressing the
[PAGE+] or [PAGE–] buttons . The
display reads “
PAN
” and the current pan setting flashes.
2
Press the pad you want to modify after selecting the Pad Bank.
3
Set the pan for the selected pad by rotating the Jog Dial or by using the
[ +1 ] and [ –1 ] buttons.
[ +1 ] and [ –1 ] buttons.
The pan setting can be “
OFF
” or range from “
-7
” (extreme left) to “
+7
”
(extreme right). A setting of “
+7
” results in the output of the selected voice
coming from the right channel only, while a setting of “
-7
” pans fully left.
A setting of “
0
” is stereo centre.
All drum voices have a pre-assigned pan. Selecting “
OFF
” uses that value.
Pressing the
[ +1 ] and [ –1 ] buttons simultaneously resets the pan to the
“
OFF
” setting.
You can use the
[ < ] and [ > ] cursor buttons to access the “
PAN
”,
“
DRUM KIT
” and “
PAD
” settings.
■
Stereo Pan
NOTE
Even though a voice is panned fully to one channel, you may still hear that voice in
the other channel due to the effects processing performed by the built-in DSP.
the other channel due to the effects processing performed by the built-in DSP.
NOTE
Each pad in your drum kit can be set with a different pan setting unless you have
selected the Bass Pad Bank. The bass or pitched voice is assigned one pan for the
entire bank.
selected the Bass Pad Bank. The bass or pitched voice is assigned one pan for the
entire bank.
PAGE –
PAGE +
PATTERN
DRUM KIT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD
SD
BD
–1
+1