Yamaha 9000 pro Manual Do Utilizador

1

 When using any electrical or electronic product, 

basic precautions should always be followed. These precautions 
include, but are not limited to, the following:

 

Read all Safety Instructions, Installation Instructions, Spe-

cial Message Section items, and any Assembly Instructions found 
in this manual BEFORE making any connections, including con-
nection to the main supply.

 

Do not attempt to service this product beyond that 

described in the user-maintenance instructions. All other servicing 
should be referred to qualified service personnel.

 

Main Power Supply Verification: Yamaha products are 

manufactured specifically for the supply voltage in the area where 
they are to be sold. If you should move, or if any doubt exists about 
the supply voltage in your area, please contact your dealer for sup-
ply voltage verification and (if applicable) instructions. The 
required supply voltage is printed on the name plate. For name 
plate location, please refer to the graphic found in the Special Mes-
sage Section of this manual. 

 

DANGER-Grounding Instructions: This product must be 

grounded and therefore has been equipped with a three pin attach-
ment plug. If this product should malfunction, the ground pin pro-
vides a path of low resistance for electrical current, reducing the 
risk of electrical shock. If your wall socket will not accommodate 
this type plug, contact an electrician to have the outlet replaced in 
accordance with local electrical codes. Do NOT modify the plug or 
change the plug to a different type!

 

WARNING: Do not place this product or any other objects 

on the power cord or place it in a position where anyone could walk 
on, trip over, or roll anything over power or connecting cords of 
any kind. The use of an extension cord is not recommended! If you 
must use an extension cord, the minimum wire size for a 25' cord 
(or less) is 18 AWG. NOTE: The smaller the AWG number, the 
larger the current handling capacity. For longer extension cords, 
consult a local electrician.

 

Ventilation: Electronic products, unless specifically 

designed for enclosed installations, should be placed in locations 
that do not interfere with proper ventilation. If instructions for 
enclosed installations are not provided, it must be assumed that 
unobstructed ventilation is required.

 

Temperature considerations: Electronic products should be 

installed in locations that do not seriously contribute to their oper-
ating temperature. Placement of this product close to heat sources 
such as; radiators, heat registers etc., should be avoided.

 

This product was NOT designed for use in wet/damp loca-

tions and should not be used near water or exposed to rain. Exam-
ples of wet /damp locations are; near a swimming pool, spa, tub, 
sink, or wet basement.

 

This product should be used only with the components sup-

plied or; a cart ,rack, or stand that is recommended by the manufac-
turer. If a cart, rack, or stand is used, please observe all safety 
markings and instructions that accompany the accessory product.

  The power supply cord (plug) should be disconnected from 

the outlet when electronic products are to be left unused for 
extended periods of time. Cords should also be disconnected when 
there is a high probability of lightning and/or electrical storm activ-
ity.

  Care should be taken that objects do not fall and liquids are 

not spilled into the enclosure through any openings that may exist.

  Electrical/electronic products should be serviced by a qual-

ified service person when:

a.  The power supply cord has been damaged; or
b.  Objects have fallen, been inserted, or liquids have been 

spilled into the enclosure through openings; or

c.  The product has been exposed to rain; or
d.  The product does not operate, exhibits a marked change 

in performance; or

e.  The product has been dropped, or the enclosure of the 

product has been damaged.

  This product, either alone or in combination with an ampli-

fier and headphones or speaker/s, may be capable of producing 
sound levels that could cause permanent hearing loss. DO NOT 
operate for a long period of time at a high volume level or at a level 
that is uncomfortable. If you experience any hearing loss or ringing 
in the ears, you should consult an audiologist. 
IMPORTANT: The louder the sound, the shorter the time period 
before damage occurs.

  Some Yamaha products may have benches and/or acces-

sory mounting fixtures that are either supplied as a part of the prod-
uct or as optional accessories. Some of these items are designed to 
be dealer assembled or installed. Please make sure that benches are 
stable and any optional fixtures (where applicable) are well secured 
BEFORE using. Benches supplied by Yamaha are designed for 
seating only. No other uses are recommended.

92-469-3