Yamaha 205M Manual Do Utilizador

This function is used to “lock” the specified parameters so that they can only be changed directly via the panel controls 
— in other words, instead of via Registration Memory, One Touch Setting, Music Finder, or song and sequence data.

This lets you change settings of the tap sound, used for the Tap Start function (page 52).

Selects the desired 
parameter for locking/
unlocking.

Determines whether the selected 
parameter is locked (checkmarked) 
or unlocked (empty).

Determines the level of the tap 
sound.

Determines the particular sound 
used for the Tap Start function. 
Any drum or percussion sound 
in the Standard Kit (page 56) 
can be selected.

Determines the brightness of 
the backlit display.

Determines whether or not the voice bank 
and number are shown in the PRESET 
page of the VOICE display (page 55). This is 
useful when you want to check the proper 
bank select MSB/LSB values and program 
number to specify when selecting the voice 
from an external MIDI device.

HEADPHONE SW (SWITCH)
Speaker sounds normally, but is cut off 
when headphones are inserted to the 
PHONES jack.
ON
Speaker sound is always on.
OFF
Speaker sound is off.