Alesis QSR 64 Manual Do Utilizador
Editing Programs: Chapter 6
QSR Reference Manual
41
C
OPYING
E
FFECTS
While editing a Program, it is helpful to be able to copy the Effects Patch from a
different Program. This can be done very easily from within the Store function.
different Program. This can be done very easily from within the Store function.
Be sure to save your changes to the current edited Program before going to a new Program.
Otherwise, all your changes will be lost.
Otherwise, all your changes will be lost.
To copy the Effects Patch from a Program to another Program:
➀
Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select
the Program Number that uses the Effects you want to copy. If necessary, use the
BANK SELECT [DOWN] and [UP] buttons to select a different Bank.
the Program Number that uses the Effects you want to copy. If necessary, use the
BANK SELECT [DOWN] and [UP] buttons to select a different Bank.
➁
Press [STORE].
The [STORE] button will begin to flash.
The [STORE] button will begin to flash.
➂
Press [CURSOR
▲
] three times to advance to Page 3.
The upper section of the display will read:
COPY
E
FFECT
TO
PROG 000 (STR)
➃
Use the [VALUE] knob to select the Effects Patch of the currently selected
Program, or any Program (000 - 127) in the User Bank to copy from.
Program, or any Program (000 - 127) in the User Bank to copy from.
➄
Press [CURSOR
▲
] once to advance the cursor to the Program number value in
the lower section of the display.
➅
Turn the [VALUE] knob to select the Program Number in the User Bank you
wish to copy the Effects to (000–127), or the
wish to copy the Effects to (000–127), or the
E
FFECT
of the currently selected
Program.
➆
Press [STORE] to complete the copy function.
✪