Yamaha PM5D-RH V2 Manual Do Utilizador

The PM5D is available as the standard PM5D model or as the PM5D-RH model which allows internal head amp settings to be 
programmed. These models differ as follows.

❏ PM5D model

• Head amp adjustments (input sensitivity settings, 

phantom power (+48V) on/off) for the analog inputs 
(INPUT jacks 1–48, ST IN jacks 1–4) are performed 
manually, using the controls of the top panel.

• Insert jacks (INSERT IN/OUT jacks) for the monaural 

analog inputs (INPUT jacks 1–48) are provided on the 
rear panel, allowing external effect processors to be 
inserted in the analog domain.

• ST IN jacks 1–4 are only for line level.
• There is no +48V MASTER switch.

❏ PM5D-RH model

• Head amp adjustments (input sensitivity settings, 

phantom power (+48V) on/off) for the analog inputs 
are controlled from within the screen via software. For 
this reason, the top panel does not have head amp con-
trols; instead, LEDs showing the presence or absence of 
a signal are provided. Head amp settings can be saved 
in a library and recalled at any time.

• Insert jacks for the analog inputs are not provided.
• ST IN jacks 1–4 support mic levels through line levels. 

Phantom power can also be supplied to ST IN jacks 1–
4.

• The +48V MASTER switch turns all phantom power 

(+48V) on/off.