Yamaha PM5D-RH V2 Manual Do Utilizador

Click the STORE button.
The EFFECT LIBRARY STORE window will appear, 
allowing you to name the library item you are saving.

Use the character palette to assign a name to 
the library item.
For details on using the character palette, refer to p.30.

Click the STORE button.
A window will ask you to confirm the Store operation.

To execute the Store operation, click the OK 
button.
The data will be stored, and you will return to the pre-
vious screen.
If you click the CANCEL button instead of the OK but-
ton, the Store operation will be aborted and you will 
return to the previous screen.

This section explains how to use the Tap Tempo function. “Tap tempo” is a function that lets you specify the delay time of a 
delay effect or the modulation speed of a modulation effect by striking a key at the desired interval.

From the effect library, recall a library item 
whose effect type uses a TEMPO parameter 
(e.g., Delay+ER., Echo, Chorus).
TEMPO is a parameter that specifies a time-related 
effect parameter (the DELAY parameter of Delay+ER. 
or Echo, or the FREQ. parameter of Chorus, etc.) in 
terms of a BPM value or a manual setting. The TEMPO 
parameter is included in delay-type effects or modula-
tion-type effects, and is shown in the lower left of the 
EFFECT PARAM screen.

➥ p.325).

In the DISPLAY ACCESS section, repeatedly 
press the [EFFECT] key to access the EFFECT 
PARAM screen.
The following illustration shows the screen when the 
“Delay

→

ER.” effect type is selected.

Move the cursor to the TAP TEMPO button, 
and repeatedly press the [ENTER] key at the 
desired tempo. (Alternatively, repeatedly click 
the TAP TEMPO button.)
The average interval (BPM) at which you press the key 
will be calculated, and that value will be input for the 
TEMPO parameter.

➥ p.133).

TAP TEMPO button

First tap

Second tap

Third tap

Fourth tap