Yamaha PM5D-RH V2 Manual Do Utilizador

P USER DEFINED KEYS

This area indicates the User Defined keys that are 
assigned as triggers to each GPI OUT port, and their 
operations.
To edit the setting, click the   button at the left to 
open the GPI OUT PORT ASSIGN window; from the 
list, select the User Defined key bank (A–D) and num-
ber (1–25), and how the trigger signal will be 
transmitted. As the transmission method for the trig-
ger signal, you can select either Latch (switch between 
active/inactive each time the key is pressed) or Unlatch 
(active only while the key is pressed).

Q TALLY

This area indicates the state of other Tally output func-
tions assigned as triggers to each port. When you 
execute the corresponding operation on the PM5D, a 
control signal will be output from the corresponding 
GPI OUT port. This control signal will be held until 
you defeat the above operation (or until that GPI OUT 
port receives a different trigger).
To edit the settings, click the   button at the left to 
open the GPI OUT PORT ASSIGN window, and select 
one of the following functions.

Here you can make settings for the Fader Start function 
which lets you use input channel faders to control GPI 
OUT ports or external devices.

A INPUT CH (Input channel)

This area shows the number and name of the channels 
(input channels, ST IN channels) for which you can 
make settings. When you click a line to select it, that 
line will be highlighted in the center of the list.

B OUTPUT TYPE

C PARAMETER

Indicates the type of signal that will be output when 
you operate the corresponding fader, and option 
parameters for it. To edit the setting, click the   but-
ton at the left of the OUTPUT TYPE field to open the 
FADER START ASSIGN window. You can select the 
following output types and parameters.

No assignment.

A trigger will be sent to the specified GPI OUT port 
according to the fader operation of the corresponding 
channel, and a control signal will be output. (The 
polarity of the control signal will be as specified by the 
settings in the GPI screen.) If this output type is 
selected, you can choose from the following two option 
parameters.

FADER START   . . .  GPI OUT port from which the 

trigger is sent when the fader 
changes from below –60 dB to 
exceed –60 dB.

No assignment

The PM5D’s power is turned on

[SOLO] key is turned on

The function assigned to GPI IN port 1 
becomes active

The function assigned to GPI IN port 2 
becomes active

The function assigned to GPI IN port 3 
becomes active

The function assigned to GPI IN port 4 
becomes active

SCENE MEMORY section [PREVIEW] 
key is turned on

Input channel [CUE] key is turned on

DCA [CUE] key is turned on

Output channel [CUE] key is turned on

Any [CUE] key is turned on

1

2

3

4