Yamaha PM5D-RH V2 Manual Do Utilizador

In this screen you can specify the amount of attenuation 
for each output channel and for each output channel of an 
I/O card.

A DISPLAY MODE

Select the channels that will appear in the display, from 
the following choices.

The screen will show the amount of attenuation for 
output channels (MIX channels 1–24, MATRIX chan-
nels 1–8, STEREO A L/R channels, STEREO B L/R 
channels), CUE L/R channels, MONITOR L/R/C chan-
nels, and 2TR OUT DIGITAL 1–3 L/R channels.

The screen will show the amount of attenuation for 
each output channel of the I/O cards installed in slots 
1–4.

B ø (phase)

If this button is on, the phase of the output port will be 
reversed.

C ATT (Attenuation)

Adjusts the amount of attenuation for each channel. 
Move the cursor to the box, and turn the [DATA] 
encoder to adjust the value in a range of –9 to 0 dB.

In this screen you can turn dithering on/off and specify the 
bit depth for dithering. These settings are made individu-
ally for each digital output jack and each output channel of 
the digital I/O cards.

A Digital output jack dither 

Specify the number of bits (16, 
20, 24 bits) used when dither-
ing the output signals from 2TR 
DIGITAL OUT jacks 1–3. If you 
select OFF, dithering will not be 
performed.

B Slots 1–4

This area shows the type of digital I/O card installed in 
each slot.

C Digital I/O card dither settings

For each output channel of the digital I/O cards 
installed in the slots, specify the number of bits used 
when dithering.

1

2 3

1

2

3