Yamaha PM5D-RH V2 Manual Do Utilizador

D Meters

These peak level meters indicate the output level of 
each channel. The current master level value is shown 
in the box below.
If clipping occurs at any point POST EQ, POST 
COMP, POST ON, POST FADER, or INSERT IN, the 

∑ segment will light.

E Pair icon

This indicates the pairing status of two adjacent odd-
numbered/even-numbered channels.

This screen contains meters that show the amount of gain 
reduction produced by the gate/compressor for each input 
channel (input channels 1–48, ST IN channels 1–4).

A GATE/COMP (Gate / Compressor)

These buttons select either Gate or Compressor as the 
processor whose gain reduction amount is shown by 
the meters. The display at the left will change accord-
ing to your selection.

B Meters

These peak level meters indicate the amount of gain 
reduction for each channel. The current fader value is 
shown in the box below.

C Pair icon

This indicates the pairing status of two adjacent odd-
numbered/even-numbered channels.

4

5

1

2

3