Yamaha PM5D-RH V2 Manual Do Utilizador

OUTPUT PATCH function

246

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual

Reference section

In this screen you can select the position at which the
insert-in/out of each output channel will be patched. Here
you can also switch insert-in on/off.

A Insert view

When you move the cursor to the insert I/O point
(

), the insert point for that output channel will be

shown graphically.

B OUTPUT CH (Output channel)

This is the number and name of the output channel
you are editing. Two paired channels are indicated by a
heart symbol shown at the left; settings

–

will be

linked for these channels. You can click this symbol to
enable/disable pairing.

C ON/OFF (Insert on/off)

This button switches insert on/off for each channel.
This is linked for paired channels.

Note

Be aware that if you turn on this button when either insert-in or
insert-out are unpatched, the signal will no longer be output
from the corresponding output channel.

D INSERT I/O (Insert I/O point)

Here you can select one of the following as the insert-
in/out location for each output channel.

E SET ALL

Turns on the corresponding item (insert or the insert
point) for all channels (including channels not cur-
rently shown in the screen).

F CLEAR ALL

Turns insert off for all channels (including channels
not currently shown in the screen).

INSERT POINT screen

INSERT POINT

PRE EQ

Immediately before the EQ

POST EQ

Immediately after the EQ

PRE FADER

Immediately before the fader

POST ON

Immediately after the [ON] key