Yamaha PM5D-RH V2 Manual Do Utilizador
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual
Reference section
259
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
D SET BY CUE (Assign by [CUE] key)
This specifies whether the [CUE] key will be used to
make/cancel DCA group assignments. While the DCA
group SET BY CUE button is on, pressing the [CUE]
key of a channel that can be assigned to the corre-
sponding group will assign the channel to the group.
(Press the [CUE] key once again to cancel the
assignment.)
make/cancel DCA group assignments. While the DCA
group SET BY CUE button is on, pressing the [CUE]
key of a channel that can be assigned to the corre-
sponding group will assign the channel to the group.
(Press the [CUE] key once again to cancel the
assignment.)
Hint
• The SET BY CUE button can be turned on for only one DCA
group. This is automatically turned off when you change
screens or turn off the power.
screens or turn off the power.
• To turn on SET BY CUE from the panel, press the ASSIGN
MODE [DCA] key and then turn on the DCA group 7/8
[CUE] key.
[CUE] key.
E CLEAR
This button clears all output channels assigned to that
DCA group.
DCA group.
F MUTE
These buttons switch muting on/off for DCA groups 7/
8. They are linked with DCA [MUTE] keys 7/8 in the
DCA strip of the panel.
8. They are linked with DCA [MUTE] keys 7/8 in the
DCA strip of the panel.
G DCA faders
These faders adjust the levels of DCA groups 7/8. They
are linked with DCA faders 7/8 in the DCA strip.
are linked with DCA faders 7/8 in the DCA strip.
H CUE
These buttons cue-monitor DCA groups 7/8. They are
linked with DCA [CUE] keys 7/8 in the DCA strip of
the panel.
linked with DCA [CUE] keys 7/8 in the DCA strip of
the panel.
I DCA LEVEL SET
Use the following two buttons to operate DCA groups
7/8 together.
7/8 together.
• ALL NOMINAL
Clicking this button will move DCA faders 7/8 to nom-
inal level (0 dB).
inal level (0 dB).
• ALL MINIMUM
Clicking this button will move DCA faders 7/8 to the
–
–
∞ dB position.
Here you can specify the output channels that will be
assigned to mute groups 1–8. Muting can be switched on/
off together for channels assigned to the same mute group.
assigned to mute groups 1–8. Muting can be switched on/
off together for channels assigned to the same mute group.
A Mute group
This area shows the mute group number. The number
corresponding to the grid where the cursor is located is
highlighted.
corresponding to the grid where the cursor is located is
highlighted.
B MUTE (Mute master)
These buttons switch muting on/off for each mute
group. These buttons are linked with the SCENE
MEMORY [1]–[8] keys of the panel (if the MUTE
MASTER button is On in the constantly-shown area at
the bottom of the display).
group. These buttons are linked with the SCENE
MEMORY [1]–[8] keys of the panel (if the MUTE
MASTER button is On in the constantly-shown area at
the bottom of the display).
Hint
When you turn muting on, channels belonging to that mute
group will behave just as though their panel [ON] key had
been turned off; no signal will be output. During this time, the
panel [ON] key LED will blink.
group will behave just as though their panel [ON] key had
been turned off; no signal will be output. During this time, the
panel [ON] key LED will blink.
C Grid
This grid lets you assign output channels (horizontal
rows) to mute groups (vertical columns). Currently-
patched grids are indicated by a symbol. Move the
cursor to the desired grid and press the [ENTER] key
(or click) to set/cancel the assignment.
rows) to mute groups (vertical columns). Currently-
patched grids are indicated by a symbol. Move the
cursor to the desired grid and press the [ENTER] key
(or click) to set/cancel the assignment.
5
4
6
8
7
9
MUTE GROUP ASSIGN screen
MUTE GROUP ASSIGN
3
2
1
4