Yamaha PM5D-RH V2 Manual Do Utilizador
MATRIX/ST function
264
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual
Reference section
C MIX TO MATRIX ON/OFF
This button is an on/off switch for the signal sent from
each MIX channel or STEREO A/B channel to the
MATRIX buses. If this button is off, no signal will be
sent from that channel to the MATRIX buses.
each MIX channel or STEREO A/B channel to the
MATRIX buses. If this button is off, no signal will be
sent from that channel to the MATRIX buses.
D PRE FADER/POST FADER/POST ON
These buttons select the position from which the sig-
nal is sent from the MIX channel or STEREO A/B
channel to the MATRIX buses, from the following
choices.
nal is sent from the MIX channel or STEREO A/B
channel to the MATRIX buses, from the following
choices.
This parameter applies to the signal sent from the cor-
responding channel to all MATRIX buses.
responding channel to all MATRIX buses.
E MIX TO STEREO ON/OFF
This button is an on/off switch for the signal sent from
each MIX channel to the STEREO bus. If this button is
off, no signal will be sent from that channel to the STE-
REO bus.
each MIX channel to the STEREO bus. If this button is
off, no signal will be sent from that channel to the STE-
REO bus.
F PRE/POST (Pre-on/Post-on)
This button selects the position from which the signal
is sent from the MIX channel to the STEREO bus, from
the following choices.
is sent from the MIX channel to the STEREO bus, from
the following choices.
G PAN (MIX
→STEREO pan)
This knob specifies the panning of the signal sent from
the MIX channel to the STEREO bus. If a MIX chan-
nel is selected in the SELECTED CHANNEL section,
the STEREO [PAN] encoder is linked with this knob.
the MIX channel to the STEREO bus. If a MIX chan-
nel is selected in the SELECTED CHANNEL section,
the STEREO [PAN] encoder is linked with this knob.
Hint
If the source is a STEREO A/B channel, parameters
5
–
7
are not displayed.
H MIX channel, STEREO A/B channel
This area indicates the MIX channel or STEREO A/B
channel from which the signal is being sent. Paired
MIX channels are indicated by a heart symbol dis-
played between them. You can click this symbol to
enable/disable pairing.
channel from which the signal is being sent. Paired
MIX channels are indicated by a heart symbol dis-
played between them. You can click this symbol to
enable/disable pairing.
This screen lists the signals sent from the MIX channels to
the MATRIX buses. You can also edit the settings from
within this screen.
the MATRIX buses. You can also edit the settings from
within this screen.
A MIX to MTRX/MTRX from MIX
Select one of the following two types of screen display.
❏ When the MIX to MTRX button is on
You can view the status of the signals sent from a spe-
cific MIX channel or STEREO A/B channel to all
MATRIX buses.
cific MIX channel or STEREO A/B channel to all
MATRIX buses.
PRE FADER
Immediately before the fader
POST FADER
Immediately after the fader
POST ON
Immediately after the MIX [ON] key / STE-
REO [ON] key
REO [ON] key
PRE
Immediately before the MIX [ON] key
(immediately after the fader)
(immediately after the fader)
POST
Immediately after the MIX [ON] key
4
8
3
7
5
6
MIX to MATRIX VIEW screen
MIX to MATRIX VIEW
1
2