Yamaha PM5D-RH V2 Manual Do Utilizador
MATRIX/ST function
268
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual
Reference section
D MIX channel
This is the number and name of the MIX channel you
are editing. Paired MIX channels are indicated by a
heart symbol displayed at the right. You can click this
symbol to enable/disable pairing. The values of param-
eters
are editing. Paired MIX channels are indicated by a
heart symbol displayed at the right. You can click this
symbol to enable/disable pairing. The values of param-
eters
2
–
3
are linked for paired channels.
Hint
• The master level of the CENTER channel is controlled by
the STEREO B channel fader. You can also use the STE-
REO B channel EQ and compressor to process the signal.
REO B channel EQ and compressor to process the signal.
• Use either one of the output jacks patched to the STEREO B
channel as the output jack for the CENTER channel. (When
the USE AS CENTER BUS button is On in the MIXER
SETUP screen, the L/R channels of the STEREO B bus out-
put the same signal.)
the USE AS CENTER BUS button is On in the MIXER
SETUP screen, the L/R channels of the STEREO B bus out-
put the same signal.)
• By selecting LCR as the monitor source, you can monitor
the LCR signal from the MONITOR OUT jacks L/C/R.
Here you can make various settings related to surround
functionality, such as selecting the surround mode, and
assigning MIX buses to surround channels.
functionality, such as selecting the surround mode, and
assigning MIX buses to surround channels.
A SURROUND MODE
Choose one of the follow-
ing as the surround mode
when using the Surround
Pan function (
ing as the surround mode
when using the Surround
Pan function (
This is the same as the
SURROUND MODE in
the MIXER SETUP screen
(SYS/W.CLOCK func-
tion). The graphic below
the buttons will change
according to the mode you
select.
SURROUND MODE in
the MIXER SETUP screen
(SYS/W.CLOCK func-
tion). The graphic below
the buttons will change
according to the mode you
select.
• STEREO
This is conventional stereo
mode.
mode.
• 3-1ch
This mode uses four chan-
nels: L (front left), C (front
center), R (front right),
and S (surround).
nels: L (front left), C (front
center), R (front right),
and S (surround).
• 5.1ch
This mode uses six channels: L (front left), C (front
center), R (front right), Ls (rear left), Rs (rear right),
and LFE (subwoofer).
center), R (front right), Ls (rear left), Rs (rear right),
and LFE (subwoofer).
• 6.1ch
This mode uses seven channels: 5.1ch with the addi-
tion of Bs (rear center).
tion of Bs (rear center).
Hint
If 3-1ch, 5.1ch, or 6.1 ch is selected as the surround mode,
MIX buses 1–8 or 9–16 are used as surround buses, starting
with the earlier-numbered buses. (Buses not used as sur-
round buses can be used as conventional buses.) These MIX
buses cannot be used as conventional bus outputs until you
return to stereo mode.
MIX buses 1–8 or 9–16 are used as surround buses, starting
with the earlier-numbered buses. (Buses not used as sur-
round buses can be used as conventional buses.) These MIX
buses cannot be used as conventional bus outputs until you
return to stereo mode.
SURR SETUP screen
SURR SETUP
1